IMG_5319.jpg (Copy) (Copy)
IMG_5264.jpg (Copy) (Copy)
IMG_5297.jpg (Copy) (Copy)
DELPHI CONNECTOR.jpg
IMG_5261.jpg (Copy) (Copy)
IMG_5299.jpg (Copy) (Copy)
IMG_5263.jpg (Copy) (Copy)
IMG_5300.jpg (Copy) (Copy)
IMG_5262.jpg (Copy) (Copy)
IMG_5319.jpg (Copy) (Copy)
IMG_5264.jpg (Copy) (Copy)
IMG_5297.jpg (Copy) (Copy)
DELPHI CONNECTOR.jpg
IMG_5261.jpg (Copy) (Copy)
IMG_5299.jpg (Copy) (Copy)
IMG_5263.jpg (Copy) (Copy)
IMG_5300.jpg (Copy) (Copy)
IMG_5262.jpg (Copy) (Copy)

Bobcat Wireless Attachment Controller - Delphi Metri Pack Kit

$850.00

Next-generation wireless control for Bobcat machines with CAN-Bus joystick systems.

Plug into your machine's 7-pin rear port, mount the receiver to your attachment,

and control your hydraulics through the joystick buttons you already use —

no 14-pin cable, no handheld remote, no cab clutter.

Ships from UT in 1 day or less. 24/7 support. 1 Year warranty.


• Reads joystick signals directly from your Bobcat's CAN-Bus system

• Up to 6 functions on SJC machines — 4 functions on AHC machines

• No 14-pin cable across the coupler — fully wireless

• Transmitter plugs into the 7-pin rear port on your Bobcat

• Receiver mounts directly to the attachment

• Replaces the need for a Bobcat ACD device

• Compatible with Skid Sync attachment harnesses

• Works with: Bobcat® SJC and AHC joystick-controlled machines

Need setup help? View the installation guide.

Not sure which harness fits your attachment? Click Here.

6 Function Harness - Deutsch DT Connectors
6 Function Harness - Deutsch DT Connectors
$60.00
6-Function Solenoid Harness – Delphi Connectors
6-Function Solenoid Harness – Delphi Connectors
$60.00

Next-generation wireless control for Bobcat machines with CAN-Bus joystick systems.

Plug into your machine's 7-pin rear port, mount the receiver to your attachment,

and control your hydraulics through the joystick buttons you already use —

no 14-pin cable, no handheld remote, no cab clutter.

Ships from UT in 1 day or less. 24/7 support. 1 Year warranty.


• Reads joystick signals directly from your Bobcat's CAN-Bus system

• Up to 6 functions on SJC machines — 4 functions on AHC machines

• No 14-pin cable across the coupler — fully wireless

• Transmitter plugs into the 7-pin rear port on your Bobcat

• Receiver mounts directly to the attachment

• Replaces the need for a Bobcat ACD device

• Compatible with Skid Sync attachment harnesses

• Works with: Bobcat® SJC and AHC joystick-controlled machines

Need setup help? View the installation guide.

Not sure which harness fits your attachment? Click Here.

The Skid Sync Bobcat Wireless Attachment Controller is our next-generation

wireless control system built specifically for Bobcat machines that use CAN-Bus

joystick controls. Unlike a universal wireless box, this system integrates directly

into your machine's data network — reading signals straight from the joystick and

transmitting them wirelessly to the receiver on your attachment.

That means you control your hydraulic attachment through the same joystick buttons

you already use. No handheld remote to manage in the cab. No 14-pin cable draped

across the coupler. No Bobcat ACD device required.

The transmitter plugs directly into the 7-pin rear port on your Bobcat. The

receiver mounts to your attachment and connects to your solenoids through the

included harness. Power up, and you're ready to work.

Whether you're running an angle broom, snowblower, stump grinder, or custom

hydraulic tool, the Skid Sync Bobcat Controller gives you clean, precise wireless

control — purpose-built for your machine.

WHAT'S INCLUDED

---------------

• Skid Sync transmitter box (7-pin machine connector)

• Skid Sync receiver box (attachment mount)

• Deutsch DT attachment harness

• Charger

• Quick start guide

Note: Compatible with Bobcat machines using CAN-Bus joystick controls (SJC and AHC).

Not sure if your machine is compatible? Contact us before ordering.