Go Wireless. Control Any Skid Steer Attachment in Seconds.

Don't rewire your machine just to run your attachment.

Skid Sync works on any skid steer, any attachment — installed in minutes, no repinning required.

Shop Control Systems

See how it works —>

1. Plug In the Box

Connect the Skid Sync receiver to your attachment’s solenoids.

2. Quick Setup

Power on, confirm your machine signal inputs, and verify function response. Takes just a few minutes.

3. Run Wireless

Your handheld remote comes pre-paired and ready — once your setup check is done, you’re ready to work.

How It Works (3 Simple Steps)

Why Skid Sync?

  • Works on any attachment — no brand-specific adapter needed

  • 4- and 6-function versions available

  • Fully sealed and epoxy-potted enclosure

  • Internal lithium battery lasts about a week per charge

  • Fused outputs protect against shorts and solenoid faults

How Does Skid Sync Compare?

Feature / Product Skid Sync U600 Skid Sync B600
(Bobcat CAN-Bus)		 SG-Genius JCB-100
(4-function)		 SG-Genius JCB-200
(6-function)		 SG-Genius WACT-6
(Wireless Trigger)		 SG-CAN60-14
(Bobcat 7-Pin)
Wireless ✅ YES ✅ YES ❌ No ❌ No ⚠️ Yes (remote only) ❌ No (wired 14-pin output)
Truly Universal
(ANY machine, ANY attachment)		 ✅ ❌ Bobcat only — ✅ ANY attachment ❌ Requires machine-specific input cables ❌ Requires machine-specific input cables ❌ Must wire into machine & cigarette lighter ❌ Bobcat only — SPECIFIC attachments only* **
Functions 2–6 4–6 4 6 6 6
Installation Time 5–10 min 5–10 min 45–120 min 45–120 min ~60+ min ~1 min
Wiring Through Cab Door? ❌ Never ❌ Never ✔️ Yes ✔️ Yes ✔️ Yes ❌ No
Weather-Sealed / Epoxy-Potted Yes Yes No No No Not stated by mfr.
Price $850 $850 ~$595 ~$875 $845 (w/ battery) ~$950
* CAT attachments: SG-CAN60-14 may require moving two pins and removing the high-flow sense pin to avoid blowing the machine fuse — per SG's own instructions, contact them before plugging in.
** John Deere attachments: ground runs on Pin A instead of Pin B on the SG-CAN60-14, so the attachment's ground wire has to be moved before use.

Skid Sync U600

Wireless✅ YES
Truly Universal✅ ANY machine, ANY attachment
Functions2–6
Installation5–10 min
Cab Wiring❌ Never
Weather-SealedYes
Price$850

Skid Sync B600 (Bobcat CAN-Bus)

Wireless✅ YES
Truly Universal❌ Bobcat only — ✅ ANY attachment
Functions4–6
Installation5–10 min
Cab Wiring❌ Never
Weather-SealedYes
Price$850

SG-Genius JCB-100

Wireless❌ No
Universal❌ Machine-specific
Functions4
Installation45–120 min
Cab Wiring✔️ Yes
Weather-SealedNo
Price~$595

SG-Genius JCB-200

Wireless❌ No
Universal❌ Machine-specific
Functions6
Installation45–120 min
Cab Wiring✔️ Yes
Weather-SealedNo
Price~$875

SG-Genius WACT-6

Wireless⚠️ Remote only
Universal❌ Requires wiring
Functions6
Installation~60+ min
Cab Wiring✔️ Yes
Weather-SealedNo
Price$845 (w/ battery)

SG-CAN60-14 (Bobcat 7-Pin)

Wireless❌ No (wired 14-pin output)
Universal❌ Bobcat only — SPECIFIC attachments only* **
Functions6
Installation~1 min
Cab Wiring❌ No
Weather-SealedNot stated by mfr.
Price~$950
Shop Control Systems

Customer Confidence

“I couldn’t get my snowblower to work with my Kubota.
The dealer quoted me $2,000 just for parts and labor— Skid Sync took care of me for a fraction of that. Works perfectly.”
— Verified Skid Sync Customer

“Other control systems online are confusing or come with terrible harnesses that run through the cab.
The ones that hook up to my 14-pin still needed re-pinning anyway.
Skid Sync was easy to install — and no wires run through my door anymore.”
— Verified Skid Sync Customer

Shop Control Systems